Globe valves

Showing all 23 results

V10 121+

Globe valve V 10

Globe valve V 10 is used for water, non-aggressive liquids, gases and steam. Valve can be manufactured as control valve with needle disc.
These valves are standard manufactured in 5 types of connections:
flanged,
welding end,
threaded,
socket weld end,
combinated.

More informations can be found below in catalogue lists.

V45 121+

Globe valve V 45

Globe valve V 10 is used for water, non-aggressive liquids, gases and steam. Thread of stem isn’t in contact with working medium.
These valves are standard manufactured in 4 types of connections:
flanged,
welding end,
threaded,
socket weld end.

More informations can be found below in catalogue lists.

V46+

High pressure globe valve
V 46, C 46

The high pressure globe valve without pressure-seal cover, just with packing sealing. The body is always from forged of rolled material. The yoke is casting. It´s used as closing or releasing element. It can be modified with cone disc and then used for rough regulation and control of flow (it´s marked V 40 in this case).

More informations can be found below in catalogue lists.

V – EN, C – ANSI.

V46.2+

High pressure globe valve
V 46.2, C 46.2

The high pressure globe valve without pressure-seal cover, just with packing sealing. The body is always from forged of rolled material. The yoke is casting. It´s used as closing or releasing element for liquid and gas medium. It can be modified with cone disc and then used for rough regulation and control of flow (it´s marked V 40 in this case).

More informations can be found below in catalogue lists.

V – EN, C – ANSI.

V43+

Highpressure globe valve
V 58, C 58

The high pressure globe valve with pressure-seal cover. The body and the yoke is always produced from either forged or rolled material. It´s used as closing or releasing element for liquid and gas medium. We do not recommend to use it as control valve.


More informations can be found below in catalogue lists.
V – EN, C – ANSI.

V43+

Highpressure control valve
V 43

The high pressure control valve with pressure-seal cover. It´s not meant to be used as closing element at it does not provide 100% tightness in close position. The body and the yoke is always produced from either forged or rolled material. It´s used to regulate and control the flow of liquid and gas medium, according to requested parameters and characteristic.


More informations can be found below in catalogue lists.

V46.2 211+

Angle valves

This category included several types of design angle valves. Bodies are from one piece or welded. Working medium can be water, steam, air and non-aggressive liquids and gases. Stainless steel valves can be used for aggressive media. Angle valves are used as close, drain or control organ for liquid and gaseous media. Type according to function is:
V 40, V 43 – Control angle valves,
V 46, V 58 – Globe angle valves.


More informations can be found below in catalogue lists.

B10+

Sludge-off valve B 10

Sludge-off valve for drain of boiler’s mud and sludge from steam boilers. Valve has two hand wheels. Smaller wheel is designated for cleaning the seat from roughly dirts. Bigger wheel is designated for control of valve. If the 100 percent tightness is required, it´s mandatory to add globe valve in to pipeline.


More informations can be found below in catalogue lists.

B25+

Continuous blowdown valve
B 25

Continuos blowdown valve provides permanent blowdown of water from steam boilers. The valve has spindle with risign thread and poisition indicator ring with scale. The valve has throttle disc for setup the ammount of blowdown. This type is not closing element, to prevent leaking, it´s mandatory to add shut-off valve into pipeline.


More informations can be found below in catalogue lists.

V65+

Changeover valve
V 65, C 65

Three-way valve, which opens/closes the flow of medium in one or another outlet, can be used separately to separate the flow or in combination with safety valve in set. In this case, the control of both valves is connected with chain.


More informations can be found below in catalogue lists.
V – EN, C – ANSI.

V34+

Globe valve – forged
V 34, C 34

The globe valve with yoke and rised packing is always produced from forged materials and is used as closing element or as release element for liquid and gas medium. The body and the yoke could be produced from casting, forged or rolled material. We do not recommend to use it as control valve.


More informations can be found below in catalogue lists.
V – EN, C – ANSI.

V67+

Globe valve V 67

The Y shape globe valve with yoke design is used as closing or releasing element for liquid and gas medium. The body and yoke are always from castings. We do not recommend to use it as control valve.


More informations can be found below in catalogue lists.

V67.1+

Globe valve – rubber lined
V 67.1

The Y shape globe valve with yoke design is used as closing or releasing element for liquid and gas medium. The body and yoke are always from castings. We do not recommend to use it as control valve.
Connection dimensions of flanges are according to PN10, PN 16.


More informations can be found below in catalogue lists.

V30+

Globe valve V 30, C 30

The globe valve with standard yoke design is used as closing element or as release element for liquid and gas medium. The body and the yoke could be produced from casting, forged or rolled material. We do not recommend to use it as control valve.


More informations can be found below in catalogue lists.
V – EN, C – ANSI.

V30.1+

Globe valve V 30.1

The globe valve with yoke modificationfor higher pressures is used as closing element or as release element for liquid and gas medium. The body and the yoke could be produced from casting, forged or rolled material. We do not recommend to use it as control valve.


More informations can be found below in catalogue lists.

V30+

Control valve V 40, C 40

The control valve with standard yoke design and cone disc is used for rough regulation and control of the flow. It´s not designed to be completly tight in close position. It´s used for control of liquid and gas medium. The body and the yoke could be produced from casting, forged or rolled material.


More informations can be found below in catalogue lists.
V – EN, C – ANSI.

V30.1+

Control valve V 40.1

The control valve with yoke modification for higher pressures and cone disc is used for rough regulation and control of the flow. It´s not designed to be completly tight in close position. It´s used for control of liquid and gas medium. The body and the yoke could be produced from casting, forged or rolled material.


More informations can be found below in catalogue lists.

Z16+

Lift check valve Z 15

Is used as automatic working closing element, which prevents backflow and impacts of medium in the pipelines. It´s used for water and non agressive mediums. This is not shut off valve. If the 100 percent tightness is required, it´s mandatory to add globe valve in to pipeline.


More informations can be found below in catalogue lists.

Z15.2+

Highpressure lift check valve Z 15.2

Is used as automatic working closing element, which prevents backflow and impacts of medium in the pipelines. It´s used for water and non agressive mediums. This is not shut off valve. If the 100 percent tightness is required, it´s mandatory to add globe valve in to pipeline.


More informations can be found below in catalogue list.

Z16+

Lift check valve with spring
Z 16, C 16

Is used as automatic working closing element, which prevents backflow and impacts of medium in the pipelines. The disc is pushed by spring. It´s used for water and non agressive mediums. This is not shut off valve. If the 100 percent tightness is required, it´s mandatory to add globe valve in to pipeline.


More informations can be found below in catalogue lists.
Z – EN, C – ANSI.

Z35+

Vertical lift check valve
Z 35, C 35

Is used as automatic working closing element, which prevents backflow and impacts of medium in the pipelines. It can be mounted to vertical pipelines. It´s used for water and non agressive mediums. This is not shut off valve. If the 100 percent tightness is required, it´s mandatory to add globe valve in to pipeline.


More informations can be found below in catalogue lists.
Z — EN, C — ANSI.

Z40+

Vertical lift check valve with automatic relief Z 40

Is used as automatic working closing element, which prevents backflow of medium in displacement pipelines. If the check valve is open, the bypass chanell is closed and vice versa. The flow capacity in bypass can be controlled by throtlling diaphragm, which should be set regarding to individual parameters of pressure/flow.


More informations can be found below in catalogue lists.

Z40.2+

Vertical lift check valve with automatic relief Z 40.2

Is used as automatic working closing element, which prevents backflow of medium in displacement pipelines. If the check valve is open, the bypass chanell is closed and vice versa. The flow capacity in bypass can be controlled by throtlling diaphragm, which should be set regarding to individual parameters of pressure/flow.


More informations can be found below in catalogue lists.